TIA on spa bonding - IAEI Florida Chapter

You are not logged in. [Log In] IAEI Florida Chapter » Forums » Code Discussion » NEC Forum » TIA on spa bonding

Florida Chapter Officers

BOD Chairman
Dan Prater
President
Ted Licitra
1st Vice President
Mark Deegan
2nd Vice President
Richard Wheelus
3rd Vice President
Vince Dellacroce
Chaplain
James Douglas
Secretary
Joe DuPriest
Treasurer
Eric L Wasser
Parliamentarian
Tim Wright

Top Posters (30 Days)

Google Search

Today's Birthdays

No Birthdays

Topic Options

Rate This Topic

#8166 - 03/31/11 11:16 AM TIA on spa bonding
gfretwell Unregistered	http://www.nfpa.org/Assets/files/AboutTheCodes/70/TIA70-11-1.pdf
Top

#8168 - 04/01/11 12:27 PM Re: TIA on spa bonding [Re: ]
Bryan Holland Secretary Registered: 10/05/04 Posts: 1622 Loc: City of North Port	I am glad they have made this change. It really is unreasonable to expect perimeter bonding at a package spa or hot tub. Like others have stated on this Forum, CMP 17 been quite messy the last few code cycles. For the number of pools that get built here in FLorida each year, it would be nice to get some consistency and let the whole bonding thing reat for a cycle or two. _________________________ Bryan P. Holland, MCP
Top

#8177 - 04/05/11 09:50 AM Re: TIA on spa bonding [Re: Bryan Holland]
Paul J Cameron Mechanic Member Registered: 11/04/03 Posts: 412 Loc: Pasco County Florida	So this is enforceable now?? _________________________ Paul Cameron Chief Electrical Inspector Pasco County Past President IAEI Suncoast
Top

#8178 - 04/05/11 10:21 AM Re: TIA on spa bonding [Re: ]
Bryan Holland Secretary Registered: 10/05/04 Posts: 1622 Loc: City of North Port	No. It only applies to the 2011 NEC, but it could be used as substantiation to grant special permission now, while under the 2008 NEC... _________________________ Bryan P. Holland, MCP
Top

#8280 - 07/26/11 08:33 AM Re: TIA on spa bonding [Re: ]
conner11 New Member Registered: 07/26/11 Posts: 1	I am glad they have made this change. _________________________ sbobet
Top